User guide
Manual Installation Procedure
Chapter 5: Using the Printer with UNIX TCP/IP ❖ 5-25
3
Login to the XNIC card on the printer through telnet by
entering:
telnet
yyy.yyy.yyy.yyy
2048
(where
yyy.yyy.yyy.yyy
is your printers XNIC IP address)
The port number 2048 is important for proper terminal
emulation.
4
At the # prompt enter access
This password access will not appear on the screen.
5
At the Local> prompt, enter su
6
At the Password>> prompt enter system
This password will not appear on the screen.
On certain hosts, you must press the Backspace key
before you can enter the password.
For example: <Backspace> system
7
Redefine the printers IP address by entering:
define server ip
ddd.ddd.ddd.ddd
where
ddd.ddd.ddd.ddd
is the new IP address you wish
to assign the printer.
8
If necessary, redefine the subnet mask (if your network uses
subnet routing). Otherwise skip to Step 9.
To redefine the subnet mask, enter:
define server subnet
mmm.mmm.mmm.mmm
(where
mmm.mmm.mmm.mmm
is the subnet mask for the
network).
Etr-ch05 Page 25 Thursday, October 24, 1996 7:31 PM