User's Manual

WIndows NT Printing Using TCP/IP LPR/LPD
Xerox 4500 PS ETH, Inst. & Operator's Guide
109
Windows NT version 4.0
This section describes how to select an LPR/LPD printer from Windows
NT version 4.0.
1. From your desktop, select “Start”, “Settings” and then “Printers”
2. Doubleclick “Add Printer”
3. Select “My Computer” and click “Next”
4. Click “Add Port”
5. Doubleclick “LPR Port”
6. Add IP address in “Name or address of server providing LPD” and
add “LPDPRT1” in the field “Name of printer queue on that server”
7. Click “OK”
8. Close the form “Printer Ports” and click “Next” to move on
9. Now select manufacturer and printers for your printer and click “Next”
10. Select “Printer Name” and click “Next”
11. Select “Shared” or “Not Shared” and then operating system(s) to print
to this printer
12. Click “Next”
13. Select “Test Page” and then click “Finish”
14. If the printer driver selected is not yet installed on your system or if
you have selected another operating system to print from, you will be
asked for your original Windows NT CD-ROM to install the printer
driver from. Please follow the instruction given on this CD-ROM.