Copier User Guide

Page 3-36 Xerox Document Centre 440/432/430/426/425/420 User Guide

Transparency options

Off the feature is not available.

Blank Dividers places a blank sheet of paper between each transparency.

No Dividers prints transparencies with no dividers, Copy Sets can still be

selected.

Printed Dividers an additional paper copy is automatically inserted after each

transparency.

Copy Sets prints additional paper sets of the transparencies. Select Copy

Sets and use the number keypad to enter the quantity required.

HINT: If a paper tray has been loaded and the tray attributes

have been programmed it is not necessary to assign a tray for

transparencies. The DC440/432/430/426/425/420

automatically detects the tray that contains the

transparencies.

NOTE: To avoid overheated or distorted transparencies do not

copy onto transparencies without selecting Transparencies

first.

N Up (2 Up - DC426/420)

DC440/432/430/425 This feature prints two or four independent documents on to

one sheet of paper. The DC440/432/430/425 reduces/

enlarges the images as needed to print them either in

landscape or portrait orientation on one page based on the

paper supply selected.

DC426/420 this feature is available as 2 Up. It enables two independent

documents to be printed side by side on to one sheet of paper.

It reduces / enlarges the images as needed to display them in

landscape orientation on one page.