User Manual

Setups
3-56 Xerox 4112/4127 EPS
System Administration Guide
6. Enter the measurement value you obtained in Step 5 in Values A & B Before Adjustment,
and the final value you want after adjustment in Desired Values A & B.
Tip
Set value A and value B so that an edge of the paper does not extend past a fold position
of the paper. An edge of paper extending past a fold position of the paper may cause a
paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment results.
8. Make adjustments again if necessary.
9. Press Save.
Z Fold Position Adjustment
Adjust the Z fold position.
1. Select Z Fold-A4 or Z Fold-8.5x11”, and press Change Settings.