All in One Printer User Manual

Printer components and options
3-4 System Overview Guide
4. Feeder tray indicator lights
5. Message display
6. Power on/off switch
7. Continue button
8. Stop button
9. Fault code display
10.Information button
Message display Shows printer status and simple operating and maintenance
instructions in a two-line message display.
Graphic display Assists you in locating the area where the printer problem
occurred, as indicated by the message in the message display.
Wire percentage
indicator
Displays the percentage of stitcher wire remaining on the spool.
This indicator appears only if your printer has the stitcher/stacker
output configuration.
Message display Shows printer status and simple operating and maintenance
instructions in a two-line message display.
Continue button Use the Continue button to resume printing.
While it is formatting a complex page, the printer controller may
cycle down the printer if the page image is not available within a
certain time frame. If this occurs, the following message appears:
Press <CONTINUE> to resume printing
You can ignore this message. As soon as the page image is
available, the printer controller cycles up the printer and printing
automatically resumes.
Graphic display Assists you in locating the area where the printer problem
occurred, as indicated by the message in the message
display.You can ignore this message. As soon as the page image
is available, the printer controller cycles up the printer and
printing automatically resumes.
Stop button Use the Stop button to interrupt printing.