All in One Printer User Manual

System Overview Guide 1-1
1. System overview
This chapter introduces the DocuPrint NPS/IPS printing system
and describes its major and optional components.
Functional overview of the NPS/IPS
The NPS/IPS printers support the processing and printing of
PDL and ASCII jobs from network workstations, as well as IPDS
jobs from an IBM host. Supported PDL formats are PostScript
levels 1 and 2, HP PCL 5e, and TIFF.
Your organization may print only IPDS jobs, network PDL jobs, or
jobs from both environments.
DocuPrint 4050 and 4090 NPS/IPS printers support:
• Printing at a rated speed of up to 50 ppm (4050) or 92 ppm
(4090) in black and white in 300 dpi
• Printing simplex and duplex
• Processing and printing of network PDL jobs and IPDS jobs
without soft boot to switch modes
• Multiple weights, sizes and types of paper (refer to the
“Supplies” appendix for details)
• Optional bypass transport for enhanced finishing and output
to third-party finishing devices
• Optional high-capacity feeder
• Optional stitcher/stacker.
Resolution
The 4050/4090 NPS/IPS provides high print quality at 300 dpi
resolution. It can receive data at 240, 300, or 600 dpi. The
controller converts 240 and 600 to 300 dpi data.