User Guide

English

Xerox WorkCentre 3550

Quick Use Guide

Install the WorkCentre 3550

1. Unpack the machine and any hardware options and locate the

Installation Instructions.

2. Follow the Installation Instructions to assemble the machine and

hardware options:

In addition you will have:

Power Cord, Software Installation CD (containing the software, printer

drivers and user documentation), Quick Use Guide (this book), Print

Cartridge, Control Panel labels, Product Enablement Key and a Telephone

Cable.

Configure the Machine

Once the machine has been assembled it must be configured. This is done

using the Product Enablement Key when the machine is switched on for the

first time.

The Product Enablement Key is delivered in a plastic tube inside the box with

the machine. The procedure to configure the machine is as follows:

1. Locate the tube containing the Product

Enablement Key. Remove the plastic card

and carefully press out the key.

2. Connect the Power Cord to the machine

and a suitable power supply outlet.

Standard Features Copy, Fax, Print, Scan, E-mail

Document Feeder

Tray 1

Bypass Tray

Hardware Options Tray 2

Stand

256 MB Extended Memory

Foreign Device Interface