User Guide

English

Xerox WorkCentre 3550

Quick Use Guide

3. Squeeze the rear guide and move from the

current position and into the correct

position for the paper size. Make sure the

guide clicks into place.

4. Load paper into the tray. Do not fill above

the 28lb (105g) line at the rear of the tray.

5. Position the side guide by squeezing the

lever and sliding it towards the stack of

paper, until it gently touches the side of the

stack.

6. Insert the paper tray into the machine.

7. After loading paper in the paper tray, set

the paper size and type using the control

panel. Press OK to confirm the settings or Stop to change the settings.

These settings will apply to Copy and Fax modes.

For workstation printing, select the paper size and type in the application

program you use on your workstation.

Note: The settings made from the print driver override the settings on the

control panel.