User Manual

Replacing the keyboard

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the keyboard cable into the system-board connector and close the

latch to secure the cable.

2 Carefully turn the keyboard over, slide the tabs on the keyboard into the

slots on the palm-rest assembly, and snap the keyboard into place.

3 Close the display and turn the computer over.

Post-requisites

Replace the battery.