Document Centre Setup Guide

Page 5-28 Fax Setups
Batch Send
Transmits several pending documents to one destination
during a single phone call.
Resend Count
Automatically re-transmits a failed page if a page error
occurs.
If the Line Monitor feature is
set to On, touch the Line
Monitor Volume button.
Select the volume setting
required.
Touch Save to continue.
Touch the Batch Send button.
Select On to enable this
feature or Off to switch this
feature off.
Touch the Resend Count
button.
Select the number of
attempts the machine should
make to send a failed page.
Touch Save to continue.