Document Centre Setup Guide

Page 5-12 Fax Setups
Output Selection
Programs the output tray for incoming fax documents.
HINT: Typically, the Left Tray is the default fax tray; the
Center Tray is the default copy tray. If a Finisher is installed,
the options will include Finisher/Stapled.
Touch the Paper Attributes
button.
Touch the buttons on the right
of the screen to select the
types, colors and sizes of
paper on which incoming fax
documents and reports will
be printed - more than one
type can be selected.
Touch Save to continue.
Touch the Output Selection
button.
Select the default output
option required - the available
options are dependent on
machine configuration.