Document Centre Setup Guide

Page 4-2 Copy Setups
Access the Copy Setups
NOTE: The graphic representations of the user interface
screens in this chapter may differ slightly dependent on
model or configuration. However, feature descriptions and
functionality remain the same as described.
Press the Access button on
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
Press the # button on the
Control Panel and use the
number keypad to enter a
Key Operator PIN - see
NOTE.
Touch Enter in the pop-up
window.
NOTE: The default password - #22222 - may be used if PINs
have not yet been assigned.
Touch the Copy Setups
button.