Document Centre Setup Guide

Page 3-8 Machine Setup
Power Save (or Auto Off)
The Power Save or Auto Off feature function is dependent
on machine configuration.
Auto Off Mode/Sleep Mode
(Power Save)
60 minutes after the last copy/print out the machine will
automatically switch into Auto Off/Sleep (Power Save)
Mode.
The copier version of the Document Centre 220/230
switches the Power ON/OFF switch to the off position. Any
stored jobs remain in the memory and the Document Centre
220/230 returns to an operational condition when powered
on.
NOTE: If Low Power is set higher than Power Save/Auto
Off, the machine displays a message that Low Power
cannot exceed Power Save/Auto Off.
Contention
Access Machine Setups as described on Page 3-1.
Touch the Contention button.
Touch any button to change the setting - a description of
each follows.
Make changes as required.
Touch Save to continue.
Touch the Auto Off or Power
Save button.
Touch the scroll buttons to
select the desired timeout
period.
Touch Save to continue.