Document Centre Setup Guide

Page 3-6 Machine Setup
Timers
Access Machine Setups as described on Page 3-1.
Touch the Timers button.
Touch any button to change the setting - a description of
each follows.
Make changes as required.
Touch Save to continue.
Auto Clear
With the Auto Clear feature enabled, the machine returns to
the default settings after the specified time.
To change the default display
for the Touch Screen:
Select the preferred default
screen
Touch Save to continue
The screen selected will be
displayed when the machine is
switched ON, when
programming or job time-out
occurs, or when AC is pressed.
NOTE: The buttons available will depend on the machine
configuration.