Document Centre Setup Guide

Xerox Document Centre 220/230/332/340 Setup Guide Page 3-1
Machine Setups Machine Setups
3 Machine Setups
This chapter contains the procedures for changing the
default settings for the Paper Trays, Date/Time, Walkup
Screen, Timers, Contention, Localisation, Report
Languages, Touch Screen Contrast, Customer Support
Number, Document Feeder, Machine Serial Number, and
Xerox Supplies Number.
Fault Override instructions are also included.
NOTE: These changes can only be made when a PIN
(Personal Identification Number) which has been assigned
Key Operator access rights is entered. The default
password is #22222 which may be used if PINs have not
yet been assigned.
Access the Machine Setups
Quick Pathway
Press the Access
button on the Control
Panel
Enter Key Operator PIN
- see NOTE
Touch Machine Setups
Press the Access button on
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
Press the # button on the
Control Panel and use the
number keypad to enter a
Key Operator PIN - see
NOTE.
Touch Enter in the pop-up
window.
NOTE: The default password - #22222 - may be used if PINs
have not been assigned.