Document Centre Setup Guide

Page 7-4 Access Rights
Assign Privileges
Touch the Access button on
the Control Panel.
A pop-up window will be
displayed on the Touch Screen.
Press the # button on the
Control Panel, and enter a
PIN with Owner Privileges -
see NOTE below.
Touch Enter in the pop-up
window.
NOTE: The factory default password is #22222. This
password is used initially, prior to new PINs being
assigned. To prevent unauthorized access, a user with
Owner privileges can change this PIN or change the
Access Rights to it.
If necessary, touch the
Additional Setups button on
the Touch Screen.