Document Centre Setup Guide

Xerox Document Centre 220/230/332/340 Setup Guide Page 6-15

Auditron Setups

Foreign Interface Device

A Foreign Interface Device might be a coin-operated device,

a bill acceptor, a card reader, or a network controlled

tracking system installed on the system. The device must

initially be enabled by the Xerox representative.

NOTE: This device controls only Copier print services and

has no bearing on the Fax services.

Access Auditron Setups as described on Page 6-2.

Touch the Foreign Interface button. Make selections as

required - a description of each follows.

Off to specify that a Foreign Interface Device is not connected.

Per-Page Control to set the device for tracking each page in each job

separately. For example, for a coin-operated device, set

External Auditron to Per-Page Control. Otherwise, more

than the current page will be printed, even though only one

coin was inserted.

Monitor to set the device to track the usage of the machine, but not

to limit users to a number of copies or prints.

Quick Pathway

Press the Access

button on the Control

Panel

Touch the # button on

the Control Panel

Enter Auditron

Administrator PIN - see

NOTE

Touch Auditron Setups

Touch Foreign

Interface.