User's Manual

Issues resolved with this release
The Xerox Nuvera EA Digital Production Systems replace the previous Copier / Printer and Production
System models. The following tables include Nuvera issues that were present in the 7.0 systems but do
not apply to Nuvera 8.0 systems.
System Hints and Tips
Subtopic CQ# Hint / Tip Resolved
Booting 17193 The System appears hung for almost 3 minutes while booting. While booting,
after the Solaris splash screen, a blank desktop appears for almost 3
minutes. There is no hourglass, or any other indication that the boot process
is progressing. Be patient, and avoid the temptation to power off the system
since there is a possibility of corrupting the file system.
Mouse
movement
35748 Mouse movement is too sensitive.
Mouse pauses 30617 No video Driver in OS, causes Mouse pause.
CFA Cancel 37578 The CFA cancel button is unavailable for auto MDT.
Remote
Services
Transfer log
38056 In the Remote Services transmission log, Remote Monitoring transactions
that have been initiated by Xerox are listed as being “Machine Data Transfer”
operations.
Networking Hints and Tips
Subtopic CQ# Hint / Tip Resolved
Operating Feature Hints and Tips
Subtopic CQ# Hint / Tip Resolved
Required Stock
Not Loaded
message
20589 You may receive an unexpected Required Stock Not Loaded message when
describing media by its attributes only (size, color, type and weight). The
preferred and recommended way is to name all media when loading it
instead of allowing unspecified as a name value.
Background
forms: Image
alignment
32842 Program the image alignment for background forms opposite (negative) of
what you want printed. For example, if you want +2mm and +3mm in the
horizontal and vertical directions, program -2mm and -3mm respectively.
Background
Forms: Offset
with LEF and
SEF
28890 Background forms are saved with a slight offset depending on whether the
media for the form was loaded as long edge feed (LEF) or short edge feed
(SEF) at the time of creation. If the LEF paper was loaded, the form should
only be used with LEF jobs. If a SEF job is used with the form, there will be a
slight misalignment of about 1/8 of an inch. To work around this, save the
form after disabling all LEF trays that contain the media that the form needs,
and program a tray with the SEF version of the media. This form can be
used for your SEF prints and there will not be any misalignment with the form
and the data.
3