User's Manual

New Capabilities for the 8.0 release

The Following features are new to the 8.0 Xerox Nuvera EA Digital Production System:

• The new EA toner is enabled. The smaller particle size improves overall image quality and a

lower operating temperature requirement improves system reliability. Performance improvement

will be realized across the supported media range and fewer service calls will be required. Image

quality improvements include: sharper text, sustained halftone uniformity, no image scatter on

coated stocks / Mylar tabs, and no toner puffs.

• EA systems include one toner bottle, yielding 200K images at 6% coverage. A customer can

purchase an optional second toner bottle.

• The new Sheet Enhancement Module (SEM) improves system reliability and stacking

performance and is standard on configurations that include the BFM or FTM finishing modules.

• Two BFM Plus modules can be combined with downstream 3

party finishing via the Finishing

Transport Module.

• A base offering of DocuSP has a single queue and simplified media programming. The

Productivity Pack is an optional upgrade that enables multiple queues and enhanced media

management using the Stock Library.

• Due to DocuSP unbundled DataStreams support, PostScript and PCL are both optional and

licensed independently.

• A base image quality offering has a single 125 lpi halftone screen. The optional Enhanced IQ

upgrade also includes 85, 106, 134, and 156 lpi halftone screens.

• With a BFM configuration, a jam recovery offset sheet enables easy stack inspection at each jam

occurrence within a run.

• The new Multifunction Finisher Pro Plus includes a new interface module that has an insertion

tray and enables hole punching. The insertion tray can deliver sheets to the top tray, main tray

and the booklet maker. Hole-punched sheets can be delivered to the top tray and main tray only.

The hole punch cartridges come in two configurations: 2/4 (punches 2 or 4 holes) and 2/3

(punches 2 or 3 holes). The MFF Pro Plus is available with the 100 and 120 ppm print engines

only.

• The new Multifunction Finisher Pro Plus includes a post process covers insertion module that can

be used for inserting pre-printed covers, tabs, and inserts.

• A new IQ Package is available. The customer can purchase the optional license to get enhanced

line screens.

• For 8.0, the following BFM configurations are supported:

o One BFM module only

o One BFM Plus module and one BFM module

o Two BFM Plus modules