User's Manual

Print Submission Tools Hints & Tips
FreeFlow Print Manager / IPP
Subtopic CQ# Description and Recommended Action
FFPM and
canceling job
submission
Selecting Cancel from FreeFlow Print Manager, while a job is being
submitted to the system, does not completely cancel the job. The
workaround is…Delete the canceled job at the printer, which appears in the
Completed Jobs list as “completed with errors.”
FFPM and job
ticket attributes
for custom stock
Hint to avoid confusion when using the FreeFlow Print Manager application
to specify job ticket attributes for custom stock. The workaround is from
FreeFlow Print Manager, when you are adding a custom stock, you should
connect to the target printer and in Job Setup, use the Stock pull down
menu (rather than the "Stocks..." button) and select "New." The window will
limit the selection of the stock attributes to those that are settable for the
connected printer. You should be cautious when using the "Stocks..."
button to add new stock. When using the "Stocks..." button, changes made
to non-applicable attributes will be ignored. This printer only allows the
following media attributes to be specified: Size, Type, Color, Weight.
FFPM and media
size names
When using FreeFlow Print Manager to program a job with a media size for
either of the size names: Spanish (XE) or Foolscap (XE), the pull-down
menu for "Main Paper Stock" in “Job Setup” will not contain these size
names.
The Workaround is...When specifying Paper Type in Job Setup of
FreeFlow Print Manager or Internet Services, the following media sizes do
not appear unless the paper is currently loaded in one of the trays at the
printer: Spanish (XE), Foolscap (XE). To program one of these sizes,
perform the following:
Load the paper in one of the trays and then, from the Main Paper Stock
pull-down menu, choose the Tray with the desired paper stock, or...
From the Main Paper Stock pull-down menu, select "New". Then from the
"New Stock" menu, select a size of "Custom (.in)" and enter the appropriate
dimensions for width and height: Spanish (XE) - 8.46 x 12.4 in., Foolscap
(XE) - 8.5 x 13.0 inches. Note that programming of any job attributes other
than Size, Type, Color and Weight will be ignored by the printer.
Internet Services / HTTP
Subtopic CQ# Description and Recommended Action
Mac operating
systems
14568 No web based job submission is available for older Mac operating system
software. The workaround is to install Mac OS X.2.6 or higher, the 1.4.1
version of Java Runtime Environment (JRE) and the Safari browser. Then
use Xerox Document Submission (XDS) Plus "Job Submission Applet."
Programming
custom stock size
When programming custom stock size, if the stock size programmed is out
of range, the warning message does not indicate the valid stock size range.
Workaround…if possible, program custom stock size at the Nuvera printer.
30