FusionPunch II Printer UserGuide

A-24 Appendix A
DocuTech 61XX to FusionPunch II to
SBM2 - with CIM
Device Profile - Properties and Default Limits –
Timings Tab
(*) = For Each High Capacity Stacker on a DT 6155 / 6180, Add 656ms To Sheet
and Set Jam Times.
(*) = For Each High Capacity Stacker on a DT6100 /6115 / DT6135, Add 861ms To Sheet
and Set Jam Times.
(#) = For Each High Capacity Stacker Add 50ms To End of Set Offset.
DocuTech Model
Paper Sizes
Set Sizes
Non-Stream Feed /
Stream Feed
DT 6155 / 6180
8.5x11/8.5x14/A4
1 to 27 Sheet Set
Stream Feed
DT 6155 / 6180
11x17/A3
1 to 27 Sheet Set
Non-Stream Feed /
Stream Feed
Time Between Sheets 120 120
Sheet Jam Time (*) 800 (*) 800 (*)
Set Compiler Processing
Time
400 600
Maximum Set Processing
Time
1200 2400
Set Jam Time
(*)
7168
(*)
7168
(*)
Time to Cycle Up 0 0
S0
Enabled Enabled
S1
Enabled Enabled
S2
Enabled Enabled
S3
Disabled Disabled
S4
Disabled Disabled
Delivery Signal Type Lead Edge Lead Edge
Delivery Start Adjust 0 0
Delivery End Adjust 50 50
End of Set Offset
(#)
250
(#)
90
(#)
Recovery Behavior SET SET
Finisher Capacity 7 7
Cycle Down Delay 0 0