User`s guide

DocuMate 152 Scanner User’s Guide 11
Installation
4. Select the option you want.
• Full Install (OneTouch and TWAIN)—This is the
recommended installation. It installs the One Touch 4.0
software which provides the necessary driver software for
the scanner. It also installs the scanning interface for the
TWAIN driver. Installing this option means that you can use
several different methods to scan, as explained in this User
Guide.
• TWAIN Only—The TWAIN driver is installed. The One
Touch 4.0 Monitor will not run and you cannot use the One
Touch features. You can use the TWAIN driver to scan from
applications with a TWAIN interface. You also will not be
able to scan with the buttons on the scanner.
5. Click Next.
During installation you will see this window asking you to select
one of the images for the Color Space setting.
The Color Space setting sets the gamma value for the scanner
so scanned items look good on your monitor. Gamma controls
the brightness of the midtones of colors. That setting can be
changed later on as you’re scanning.
NOTE: If your computer is running Windows XP or Windows
Vista, Microsoft’s Windows Image Acquisition (WIA) interface for
scanning is always available, regardless of your selection on this
window.
NOTE: If you decide to change the scanner’s installed drivers
later on, you must first uninstall the drivers the scanner is
currently using. See the section “To Install Another Driver” on
page 113.