Datasheet

Media Product Data Sheets
Xerox Wide Format Supplies Applications Guide
Version 2.0; April 2005
57
Xerox White Matte Banner Film 200 micron*
Product Description
A matte, white film for single drop banners, roll-up stands and roll-down hanging displays. Designed to produce
vivid, full-color, photo-realistic, direct-write digital images in 600 dpi mode with dye and pigment inks and rapid
drying. The thickness of this film gives banners sufficient body and strength to provide a flat image surface when a
display is erected, and the film is tear-resistant to withstand handling. The matte finish of the base film offers an
image
surface with minimal light reflection without dulling the printed image. This is also a truly water resistant media for
use as an alternative to paper in “field” projects or when graphics will be exposed to weather or rough handling.
Applications
Good for all roll-up and roll-down or hanging banners, durable presentation graphics, such as exhibition graphics
panels, posters, point-of-sale graphics, signage indoors or outdoors, merchandising materials, mounted prints,
promotional displays and corporate graphics.
Physical Properties
*Currently available in Europe only.
Product Code Width Length
m
2
023R01604
1524 mm
60"
20 m
66 ft 31
023R01603 1372 mm 54" 20 m 66 ft 27
023R01473 1270 mm 50" 20 m 66 ft 25
023R01602 1067 mm 42" 20 m 66 ft 21
023R01601 914 mm 36" 20 m 66 ft 18
Base Weight
265 g/m
2
Caliper (microns) 200
Whiteness (CIE) 108
Opacity 98%
Compatibility
Printer Ink Type
Xerox 8142/8160
Dye/Pigment
HP 2XXX/3XXX/5XXX Dye/Pigment
Epson Stylus Pro 7000/9000/7500/9500/10000 Dye/Pigment
Epson Stylus Pro 7600/9600/10600 Ultrachrome
®
Encad Novajet GA/GS/GS+/GX/GO
Encad 1000i Dye/Pigment
Critical Operating Instructions
• For best results store and use within temperature of 50-86°F (10-30°C) and 30-65% relative humidity.
• Store the product in its original bag and box.
• Lamination is recommended for prints requiring satin, gloss or other finishes and/or prints requiring UV
protection or greater general durability if they may be subject to moisture or mechanical damage. This media is
suitable for pressure (cold) laminates only – not suitable for thermal (hot-melt) laminates. Use a laminate of at
least 75 micron thickness on front side or both sides.