Datasheet

Media Product Data Sheets
Xerox Wide Format Supplies Applications Guide
Version 2.0; April 2005
55
Color
Product Code
Width Length
m
2
Polycarbonate Pop-Up Film –
Back Print
023R01606 900 mm 40 m 131 ft 36
Polycarbonate Pop-Up Film –
Back Print
023R01474 914 mm 36" 20 m 66 ft 18
White Polyester Self-Adhesive
Light Stop Backer
023R01478 880 mm 50 m 164 ft 44
White Polyester Self-Adhesive
Light Stop Backer
023R01477 914 mm 36" 20 m 66 ft 18
Xerox Polycarbonate Pop-Up Film & Backer*
Product Description
A printable polycarbonate pop-up film, a translucent film, which is printed on its reverse side and sealed with a
backer to form a 2-part pop up graphic display panel. Strong and dimensionally stable with a low glare surface
finish. Use in conjunction with Xerox self adhesive backing film for robust pop-up panels. Compatible with dye
and pigmented inks.
A self-adhesive backer, highly opaque, white matte melinex-based film with a water-based adhesive backing for
use in conjunction with printable polycarbonate pop-up film (above). The backer provides a light stopping, rigid,
dimensionally stable pop-up base. It can also be used as a light-stop laminate for 200 micron White Matte Banner
Film for a total light stopping solution.
Applications
For exhibition panels, and pop up displays where a totally opaque, light stopping solution is required.
Physical Properties
Base
Weight
312
g/m
2
Caliper
(microns)
275
*Currently available in Europe only.
Compatibility
Printer Ink Type
Xerox 8142/8160
Dye/Pigment
HP 2XXX/3XXX/5XXX Dye/Pigment
Epson Stylus Pro 7000/9000/7500/9500/10000 Dye/Pigment
Epson Stylus Pro 7600/9600/10600 Ultrachrome
®
Encad Novajet GA/GS/GS+/GX
Encad 1000i Dye/Pigment
Critical Operating Instructions
• For best results store and use within temperature of 50-86°F (10-30°C) and 30-65% relative humidity.
• Store the product in its original bag and box.
• Print in reverse on the matte side.
• Allow the print to cure for 2-3 hours before finishing.
• For pop-up displays cold laminate with Xerox light stop backing film.
• For best results laminate with rollers at room temperature and with the minimum amount of pressure.