Datasheet

Xerox Wide Format Supplies Applications Guide
Version 2.0; April 2005
31
Media Product Data Sheets
Xerox Matte Presentation Paper 120 g/m
2
Product Description
An economical, general-purpose, matte-coated presentation paper available in three weights. The two lighter weight
offerings (90 g/m
2
and 120 g/m
2
) are designed for lower ink density printing with all inkjet plotters commonly used
in these environments. This paper, in either 90 g/m
2
or 120 g/m
2
base weight, gives sharp line definition (meeting
the GIS/CAD line width specifications) and can accept lower-density color fills giving uniform shades with instant
drying. These lightweight matte presentation papers are not suitable for high-density graphic imaging.
The 90g/m
2
base weight is intended for everyday output and the 120 g/m
2
variant gives extra stiffness and thickness
for high quality presentation drawings. Both are treated also on the reverse to prevent curl. The 120 g/m
2
paper can
be used as a low-cost poster proofing paper.
Applications
High quality CAD line drawings with low and medium density solid color infill, charts, mapping, corporate
or organization charts, simple signage (i.e. door signs, changeable short-term menu/price signs, schedules
and timetables, survey/mapping/graphic “proofs” for review prior to final graphic production on higher
capacity media.
Physical Properties
Product Code Width Length
m
2
023R02084
1524 mm
60"
46 m
150 ft 70
023R02085 1270 mm 50" 46 m 150 ft 58
023R02086 1067 mm 42" 46 m 150 ft 49
023R02087 914 mm 36" 46 m 150 ft 42
023R02088
610 mm
24"
46 m
150 ft 28
Base Weight
120 g/m
2
Caliper (microns) 160
Whiteness (CIE) 132
Opacity 96%
Compatibility
Printer Ink Type
HP 1XXX
Dye (& Black Pigmented)
HP 2XXX/3XXX/5XXX Dye/Pigment
Epson Stylus Pro 7000/7500/9000/9500 Dye/Pigment
Epson Stylus Pro 7600/9600/10600 Dye/Ultrachrome
®
Encad Novajet GA/GS/GS+/GX/GO
Critical Operating Instructions
• For best results store and use within temperatures of 64-77°F (18-25°C) and relative humidity of 40-60%.
• Attempting full-density graphics prints will overload these lightweight papers with ink. This may cause cockle
and distortion of the paper which can result in head strikes and damage to the inkjet writing heads.
• Allow prints to dry before laminating.
• Lamination is recommended for prints requiring satin, matte, high gloss or other finishes and/or prints requiring
UV protection or greater general durability if they may be subject to moisture or handling. Best used with
thermal laminates on both sides of a print.