Spec Sheet

For product inquiries: [e-mail]
www.xerafy.com Version: 07.02.15
Application Instructions
The Metal Skin can be applied directly onto metal surfaces. Its polarization is along the length of the label. For the
purpose of determining a guideline, we’ve defined acceptable performance as 50 percent of the expected read distance.
If the label is horizontally oriented, the minimum bending radius is 1.57 in (40 mm). If the label is vertically oriented, the
minimum bending radius is 0.98 in (25 mm). Exceeding these recommended ranges will affect performance and may also
physically damage the label, resulting in shortened life span.
The label should ideally be applied in the following conditions, 68°F (+20°C) and 50% relative humidity. For exceptional
conditions, please contact Xerafy. The label adhesive will provide maximum adhesion 24 hours after application.
Horizontally oriented
Vertically oriented
101.6 mm
38 mm
79.8 mm
49.8 mm
Diameter in inches
Read range in feet
Read range
Diameter in inches
Read range in feet
Order information
X50A0-GL000-M4 Mercury Metal Skin Dry Inlay in Roll
X50A0-GL100-M4 Mercury Metal Skin Label in Roll
Operational and Environmental Specifications
Operational temperature
Cold
Dry heat
Thermal shock
-40°F (-40°C)
+185°F (+85°C)
-40°F to 185°F (-40°C to +85°C); cycled
Application temperature
Cold
Dry heat
-40°F (-40°C)
+185°F (+85°C)
Storage conditions 2 years at +68°F (+20°C) and 50% relative humidity
Shock (drop) 3 ft (1 m) to concrete/granite up to 100 cycles
Vibration MIL-STD-810F
Compression strength 92 psi (634 kPa)
Compliance RoHS, CE