Installation Guide

Installation Recommendations:

• The PSD3 light fixture should be installed on a flat and stable

surface—the higher the light is placed, the larger the area of

illumination.

• Avoid installing the light near an air conditioner, heater, or high-

voltage system, since quick changes in temperature may activate

the motion- detection system and run down the light’s power.

• Avoid positioning the motion sensor head towards street traffic, or

where other movements may trigger the light needlessly and drain

the battery.

• The solar panel should be installed facing the sky where direct

sunlight can shine on the panel at least 6-8 hours per day. (Before

initial use, the panel will need 2-3 days of sunlight exposure to fully

charge the battery.)

• The motion sensor is most sensitive to movement across the

device, and less sensitive to motion directly towards or away from it.

• Periodically use a soft, damp cloth to clean accumulated dust or

snow off of the solar panel. This will preserve the panel's battery

charging efficiency.