Operation Manual

20
EN
OVERVIEW (CHARGE)STATUS
With the ‘charging process’ LED’s and the ‘ power’ LED the status of the battery
charger can be followed.
Charge process:
Power:
Red
Bulk stage
Green
Charger activated
Yellow
Equalize stage
Flashes two
times
every 10
seconds
Charger de-activated
(standby mode)
Yellow, flashes
Compensation
charging*
Red
Problem detected **
Green
Float stage
* = optional stage
Green, flashes
Jogging
**= advise the trouble shooter
TROUBLE SHOOTING
Problem
(Possible) cause
Action
The battery is connected to
the charger and the charger
does not work. No LED’s
burn.
No input voltage present.
Check the mains voltage.
Input fuse broken.
Replace the fuse or return the
charger to the retailer/
manufacturer
Charger is in its bulk stage
(LED red), but the charge
current is not 100%.
Charger feels hot. Internal
temperature too high.
Charger has reduced the
charge current.
When the charger has cooled
down enough, the charge
current will be corrected.
Battery doesn’t absorb any
current.
Battery sulvated.
Check the battery.
Battery was already full when
the charger was activated.
Charger will switch soon to the
next stage (LED yellow).
The battery isn’t charged
fully, but the charger
indicates the charging
process is finished.
The battery is sulphated.
Check the battery.