How-To Guide

2.Then tap "+".
3.Find "Jinvoo Smart" in the list.
4.In the new window, select your
Jinvoo Smart account’s region,
type your Jinvoo Smart account
and password, then tap "Link Now".
5. After you assign rooms for
devices .
6.Your devices will be listed in
the Home Control page.
Ok Google, turn on/off bedroom light.
Ok Google, brighten bedroom light.
Ok Google, dim bedroom light.
Ok Google, set bedroom light to red.
20
21
23
Now you can control your smart
devices through Google Home.
Take bedroom light as the example,
the supported voice commands
are as below:
Now,you can use Echo to conteol two
different smart plugs.Like Alexa,turn on
the living room/Alexa,turn on the dining
room.Alexa will turn on different devices
separtely.When you say Alexa,turn off
the living room/Alexa,turn off the dining
room.Alexa will turn off the different
devices separately.
Alexa Skils：
Google Assistant：
Also,you can create a group to control
these devices together.
1.Open Alexa app and click the button ,then
2. Input Jinvoo Smart to search all column,
3. Click Jinvoo Smart and Enter.
J
Ver：2018-07-25
How to reset the devices
1.Plug/Outlet Series:
Press the power button keep to 6 seconds to reset
the device, the blue indicator light flash is 2 times
per second, then it enter Quick Connection Mode.
Under quick connection mode, press the power
button keep to 5 seconds to enter AP mode ( the
blue indicator light flash is 1 times in 2 seconds).
2.LED Bulb Series:
After plug into power ,turn on/off the power in 3
times continuously ,then bulb will be enter fast
flash mode.
Turn on/off the power in 5-6 times continuously
till the bulb enter slow flash mode ,then you can
add devices by AP mode.
3.Wall Switch Series:
Press any one button keep to 6 seconds to reset
the device, the blue indicator light flash is 2 times
per second, then it enter Quick Connection Mode.
Under quick connection mode, press the power
button keep to 5 seconds to enter AP mode ( the
blue indicator light flash is 1 times in 2 seconds).
Adding a New Device in Quick Connection
* Make sure the Wi-Fi smart device is standby. (the
blue indicator light flash is 2 times per seconds)
after plug in the socket.
* The smart Wi-Fi devices only supports 2.4GHz
Wi-Fi router.
* Open app and click “+” to add device.
* Then click “All devices”,choose any a device of
them.
*Click “Confirm indicator rapidly blink” (if not ,please
reset the device).
* Select Wi-Fi network, input Wi-Fi password,
connect and click.
* Once connected the app will prompt the
connection, and click ok.
* Make sure the Wi-Fi device is standby (the blue
indicator light of Wi-Fi device flashes in 1 times in 2
seconds) after plug in the socket.
* The smart Wi-Fi devices only supports 2.4GHz
Wi-Fi router.
* Open app and click “+” to add device.
* Then click “All device”, select any a device of them.
* Click “AP Mode” ,and click “Confirm indicator
slowly blink” (If not ,please reset the device).
* Click Wi-fi network ,input Wi-Fi password, then
“click now” to go to WLAN setting in your smart
phone and select the SmartLife xxx for your WiFi,
on need to input password once you select it .
* Go back to app and app will enter connecting .
4.Curtain Switch Series:
Press any one button keep to 15 seconds to reset
the device, the blue indicator light flash is 2 times
per second, then it enter Quick Connection Mode.
Under quick connection mode, press the power
button keep to 5 seconds to enter AP mode ( the
blue indicator light flash is 1 times in 2 seconds).
6.Click “Authorize” ,setting finished, Click close
22