User's Manual
Table Of Contents
- Declaration of Conformity (RED)
- User Manual 认证Dongle
- WARNING
- Getting Started:
- SECTION: Thank you
- SECTION: Navigation
- SECTION 1: Tablet Box Contents
- SECTION 2: Connecting the Tablet
- SECTION 3: Install the Driver
- SECTION 4: Charging the Tablet
- SECTION 5: Key Features of the Tablet
- SECTION 6: Key Features of the Xencelabs Quick Ke
- SECTION 7: Product Registration
- SECTION 8: Video Tutorials
- SECTION 9: More Resources
- Xencelabs Quick Keys Setup
- SECTION: Quick Keys Thank You
- SECTION: Quick Keys Navigation
- SECTION 1: Quick Keys Box Contents
- SECTION 2: Connecting the Xencelabs Quick Keys
- SECTION 3: Install the driver
- SECTION 4: Charging the Quick Keys
- SECTION 5: Key Features of the Quick Keys
- SECTION 6: Pairing the Quick Keys with the Tablet
- SECTION 7: Product registration
- SECTION 8: Tutorial videos
- SECTION 9: More Quick Keys Resources
SECTION 4: Charging the Tablet
To charge the tablet (and the Quick Keys if you bought the bundle), connect it to a powered-on
PC, a powered USB hub or other USB charger (Figure 3).
To use the tablet over a wireless connection you should make sure the tablet is sufficiently
charged. When using a 5 volt 1.5 amp power supply, the tablet will take approximately 3 hours
to fully charge and will last around 11 hours of continuous use.
The driver will give you an indication of tablet charge level. You can also see if the tablet is
charging by looking at the power LED. The Quick Keys, if you bought the bundle, has similar
LEDs.
Figure 3
Next: Key Features of the Tablet
Return to top