User Manual

SUPERPRO
®
7000 User’s Guide Chapter 5
Programmer not ready: Turn off the programmer power switch and turn it
on again after a few seconds.
Programmer is running: The programmer hardware is operating. Wait until
the operation is finished.
File open error: The open file operation failed.
Out of Memory: The memory overflows.
Production mode isnt available for this chip: Since the production mode is
dependent on the pin check, the chips without pin check function are not
applicable for production mode.
Cancel production mode: Cancel the production mode.
Too long file name: The file name is too long.
User cancel: The system displays this message after you select Cancel on the
Status bar.
Cant cancel!: The Cancel operation has failed.
Not a project file: The file selected is not a project file. After the software is
updated, the software may not be able to identify a previously created file.
You will need to create the file again.
47 of 51