User Manual

SUPERPRO

7000 User’s Guide Chapter 4

4.3.3.2 Fuse Buffer

When you select Edit from the Buffer menu with the appropriate file type, the

system opens the Fuse Buffer Edit window, illustrated below.

The data for editing is either 0 or 1. Refer to the data manual of the device and the

JEDEC to determine which of the following explanations for the data apply.

 1 represents an intact fuse and 0 represents a blown fuse, or

 1 represents a blown fuse and 0 represents an intact fuse

4.3.4 Device Configuration Word

Important: The device configuration word varies from device to device. Refer to the

device data manual for more information about the configuration words. Set the

configuration words according to the requirements of your target system. Otherwise,

you cannot use the device normally even if it is normal when preparing and

verifying the program.

32 of 51