User Manual

SUPERPRO
®
7000 User’s Guide Chapter 4
4.3.3 Manage data in buffer
There are two major types of buffer, Fuse Buffer and Data Buffer (HEX/ASCII buffer).
In following section the operations of these two types of buffer is described and a
typical buffer operation window is shown below.
4.3.3.1 HEX/ASCII Data Buffer
 Locate. Enter the address of the data you wish to display and select OK to
quickly move the cursor to the desired location.
 Fill. To fill the data in the buffer between the Start and End address. For Fuse
buffer, the data must be 0 or 1, and for Data Buffer (HEX/ASCII buffer)
 Copy. Select Copy to open the Copy Buffer dialog box.
o Enter the start address in the Start Address field.
o Enter the end address in the End Address field.
o Select OK to copy the data between the start address and the end
address, beginning with a new address. Otherwise, select Cancel.
30 of 51