User Manual

SUPERPRO
®
7000 User’s Guide Chapter 4
The figure below shows a typical Manage Project Library window.
Some basic commands related to the project file operation are:
Send Project. This will send the existing project file(s) to the SD card. One
can also encrypt the SD card to protect the data.
Delete Project. To delete the project being selected.
There are many SD card manufacturers in the market and the quality varies a lot
across different brands. The ones from Kingston
TM
, and Sandisk
TM
is recommended.
The default operation speed is high transfer rate, where low transfer rate (tick the
check-box) is preferable when the sending project operation fails. If there are many
large project files need to be sent, then replication of SD card is recommended.
4.2.4 SD card encryption
SUPERPRO
®
7000 enables the encryption of SD card. Some SD card encryption
operations are,
Set password. To set a 6-character password for a SD card. Once a SD card is
protected by a password, it becomes encrypted and needs the password for
any operation.
28 of 51