User Manual

SUPERPRO
®
7000 User’s Guide Chapter 4
apply:
 With a HEX/ASCII data buffer (EPROM, MCU etc.), the system assumes that
8 bits of the data are valid.
 With a JEDEC buffer (PLD/PAL), the system considers the lowest bit (1 bit) of
the file data valid.
Select Load from the File menu to open the Load File dialog box, as illustrated
below. The red labels refer to the numbered notations follow this figure.
1. Buffer. To select the Buffer name from the drop down list. The system loads
the file data into the buffer accordingly.
2. File Nmae. To enter the name of the data file to load it, or you can select
Browse and choose the file using the Select File box (see figure below).
23 of 51