Manualshelf

User Manual

ManualsBrandsXeltek ManualsUniversal Device ProgrammersUSB Interfaced Universal Programmer Xeltek SuperPro 7100
21222324252627282930
SUPERPRO
®
7000 User’s Guide Chapter 3
1. Enter the new password in the Enter the password field. Leave the field blank
to indicate no password is required.
2. Re-enter the password. Both fields must match for a valid password.
NOTE: Spaces are characters that can be used in the password.
The system asks for a password whenever performing a function that requires a
password. The Enter Password screen is illustrated below.
3.3 Programming When Connected by Hub
SUPERPRO
®
7000 provides a connection hub and user can simultaneously operate
multiple SUPERPRO
®
7000 programmer by using the hub.
Click menu Programmer Module Management, and select the number of the
programmer you want to operate. Picture below shows the interface when
simultaneously operating three programmers.
Every programmer has a unique number. The programmer’s first line of the LCD
display will show the number of this programmer. The module that is selected at the
time will be highlighted. The device that is going to be programmed can be different
type(s) in each of the module that is connected through the hub.
20 of 51