User Manual
SUPERPRO
®
7000 User’s Guide Chapter 3
Verify
NOTE: This step is necessary. The chip must pass Verification before the
programming can be implemented. Some chips provide only the
accumulation check function, such as VerifyCRC instead of a unit‐to‐unit
check function. Very few chips do not provide the accumulation check
function.
Security or Protect if encryption is required
NOTE: You may need to set the configuration word before performing
encryption. Refer to Device Configuration Word on page 37 for more
information. Select Auto to finish all the operations in one step.
Execute Production Mode to Program Chips in Batches
Select Production Mode from the Option menu to program devices in large
quantities. This function facilitates the job of the user who programs chips in
batches. In order to program chips in batches, the programmer always
conducts the insertion test. The programmer waits for the chip insertion to
initiate while the system displays the following prompt: Please, insert a
device into the socket. Once you have properly inserted the chip, the auto
batch-processing command starts automatically.
3.2.5 Security and password input
To prevent the user’s data from being used by others, the program asks the user to
input the password in the operation process. The Set Password screen is illustrated
below.
19 of 51