User Manual

SUPERPRO
®
7000 User’s Guide Chapter 3
3.2 Programming Procedures
This section provides information on steps for common procedures to programme
devices using SUPERPRO 7000.
Before using the programmer to program a device, make sure that the programmer
is installed properly and that the computer and programmer are communicating
successfully. Make sure that you have the appropriate adapter for your SMD devices,
if applicable. Insert the chip correctly. Follow the guidelines of the standard chip
insertion markings near the pin-driver socket. However, if you select SMD or a
device that requires non-standard insertion, the system prompts you with the
appropriate chip insertion.
3.2.1 Select the device
To open the Device Selection window, choose one of the following options:
 Select the Device Selection icon
 Select the Device menu and select the Select Device (Device) option.
The system then displays the Device Selection screen as shown below.
NOTE: The red device name means that such device(s) need authorization to use.
16 of 51