User Manual

SUPERPRO
®
7000 User’s Guide Chapter 2
Chapter 2 System Installation
This chapter provides a brief guidance on how to install the SUPERPRO software
and connect the programmer hardware properly.
NOTE: To avoid complications during the installation process, you must setup the
software before connecting the programming hardware (the USB device) to your
computer. That is, installation through the "Add New Hardware Wizard" of
Windows system is NOT recommended (this might lead to wrong drivers with a
different compatible device ID).
2.1 Software Setup
Select the software to setup your SUPERPRO programmer either from the CD‐
ROM or by downloading the program from the Xeltek website. Instructions for both
methods are described below.
2.1.1 Software setup from CD
1. Insert the CD into the CD-ROM drive.
2. If the setup program does not start automatically, run SETUP.EXE located in
the root directory. A dialog box will be displayed then (illustrated below).
7 of 51