User Manual
SuperPro IS01
Stand-Alone Universal In-System Programmer
Overview
SuperPro IS01 is a professional multi-function serial programmer with compact size, fast
programming speed, good reliability and high cost performance. It supports almost all
serial programmable devices and is very suitable for in-system or in-application
applications. It is designed to communicate using USB 2.0 port for development
requirement and can also work in standalone mode (without connecting to a PC) for
production requirement.
Advantages
Ultra-Fast Programming Speed Our semiconductor manufacturer approved algorithms,
precision and clean signals guarantee high programming yield. Algorithms are
performed with state machine architecture constructed with FPGA to achieve an ultra-
high programming speed.
Largest ISP Device Library SuperPro IS01 currently supports more than 10,000 devices,
which is the largest device library in the serial programming industry. SuperPro IS01
supports all common ISP protocols such as I2C, SPI, UART, BDM, MW, JTAG, CAN and
RS232.
Longer Cable Length - Supported with Adjustable Speed SuperProIS01 is a serial
programmer with an ISP cable that can program a target board up to 3 feet (1M) in
distance. VDD (0-5.5V /0.5A) and Vpp (0-15V / 0.2A) lines provided to power the target
board and the target devices.
Mass Production Mode Once the programmer detects that the target board is ready
and receives an ISP signal, it immediately starts the functional operation defined by
AUTO without keyboard operation. TPIN and TPOUT in the ISP port are provided for
this purpose. TPOUT supplies high level, and TPIN is the level detection input line.
Multi Programming Up to 12 programmers can be connected to a single PC for
programming multiple PCBs or all the programmers can be used in stand-alone mode.
Technical Support Xeltek is proud to offer same day support for technical inquiries.
SuperPro IS01 comes with
ISP Cable
Software CD
AC Adapter
Specifications
ISP Protocol Supported
All common ISP protocol i.e. I2C, SPI, UART, BDM, MW, JTAG, CAN, RS232
(Contact Xeltek for more details)
PC Interface
USB 2.0
PC Compatibility
Windows XP/Vista/7/8/10 (32/64 bit)
Power Supply
AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Dimensions
Main unit: 137(L) x 87(W) x 45(H)
mm
Package: 304(L) x 228 (W) x 76(H) mm
Weight
Main unit: 0.34kg (0.75 lbs)
Package: 1.36kg (3 lbs)
PROGRAMMER FEATURES
Two operating modes available
1) PC-Hosted Mode: Programmer is
controlled by a PC via USB port
2) Stand-Alone Mode: Operatin is
performed via the keyboard, LCD,
and an optional SD card without a PC
attached. Porject file(s) should be
downloaded onto the SD card from a
PC prior to Stand-Alone operation.
Supports ISP programming of devices with
I2C, SPI, CAN, UART, BDM, MW, JTAG, or
any other serial port.
Built with on-board Flash memory and a
slot for SD card.
Built with LCD display and Keypad for
stand-alone operation. Customized BIOS
and user interface will be provided.
An external AC power adapter will provide
power to the programmer and target
device. There will be no power applied
from the target equipment.
DLL or Virtual Com communication
command set available for third party
application (optional).
Over-current protection circuit limits
power to the target device.
Serial number is written within the built-
in flash memory, which will be displayed
when powered on.
2 year warranty
www.xeltek.com
sales@xeltek.com
USB Cable
SD Card for stand-alone operation
Xeltek and SuperPro are registered trademarks of Xeltek