User Manual

Characteristics
 Built-in 4 asynchronous high-speed programmer modules representing
the industry's peak level. SuperPro / 7500. Supporting up to 16 chips for
simultaneous programming is the best choice for manufacturers with
high productivity, high versatility and high quality.
 Supports almost any device, including EPROM, Paged EPROM, Parallel
and Serial EEPROM, FPGA, PROM, FLASH (NOR & NAND), BPROM,
NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc.
Support device voltage as low as 1.2V. Support device packages
including but not limited to DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ,
SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP,
SSOP, TSSOP, SON , EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN,
HVQFN, etc.
 Programming eMMC, NAND FLASH, SPI FLASH and other devices
are faster
Manufacturers Devices 3968MB(P+V) 1984MB(P+V) 1024MB(P+V)
TOSHIBA THGBM5G6A2JBAIR 315 s 153 s 52 s
SANDISK SDIN7DU2-32G 314 s 155 s 56 s
SAMSUNG KLMCG8GE4A 320s 158 s 58 s
SAMSUNG KLMAG4FEKA 318 s 160 s 62 s
 Optional adapter pressurization booster, it is more labor-saving to pick
and place the chip.
 Support all kinds of popular NAND FLASH Platforms and can be
customized.
 The tenth generation of pin drive technology ensures a cleaner signal, a
wider voltage range and a higher signal bandwidth. With the strict
compliance with the chip manufacturer's specifications, the algorithm
software that accurately implements the timing specified by the IC
manufacturer ensures a very high programming yield.
 Comprehensive security mechanisms to protect chips and
programmers. Features include hardware self-test, voltage auto-
calibration, chip mis-insertion detection, overcurrent detection,
overvoltage protection, etc.
 USB2.0 Communication interface;
 Powerful and rich software features
Mass production mode Automatic monitoring of the socket, once the
chip is found in place, automatically start programming.
Panel mode Each module has an independent START button and a
PASS/BUSY/FAIL indicator
The lamp can be operated directly nearby.
Engineering Management Simplifies the chip programming
preparation process, will inject the device model selection, file loading
Device configuration word settings programming options, batch
command definitions, etc.
Project file. The operator only needs to load the project file to start
programming.
Barcode Management Support barcode loading project files to avoid
manual selection errors
Electrical and mechanical Specifications
 Communication interface: USB2.0
 Grounding socket
 Power: AC Adapter input AC 100v-240v; Output: 12V/7A
 Host Size: 540 x 216 x 75 Mm
Weight: 6.8 Kg
 Packaging: Size: 600 x 250 x 105 mm;
 Weight: 9.2Kg
 Temperature: ：0-40°C。
 Humidity： 20%-80%
Standard packing
 Superpro /7504 Host
 Power adapter
 Usb2.0 Cable
Options
 Various package adapters
 Adapter pressure booster and various specifications of pressure plate.