User Manual

Superpro

/ 7504 High Speed Production Programmer

Mass production programmer for high production capacity, high versatility and high yield

Built in 4 Superpro / 7500 programmer modules representing the industry's peak level, up to

16 chips can be programmed at the same time. Supports almost every device you can see

with extraordinary programming speed, including eMMC, NAND FLASH, SPI FLASH, NOR

FLASH, MCU, CLPD, etc. If you are an industry leader, you need a programmer with high

throughput, high programming yield and quality, a wide range of supported devices, and the

ability to quickly upgrade to support future new devices.

PAGE 1
Superpro ®/ 7504 High Speed Production Programmer Mass production programmer for high production capacity, high versatility and high yield Built in 4 Superpro / 7500 programmer modules representing the industry's peak level, up to 16 chips can be programmed at the same time. Supports almost every device you can see with extraordinary programming speed, including eMMC, NAND FLASH, SPI FLASH, NOR FLASH, MCU, CLPD, etc.
PAGE 2
Characteristics    Electrical and mechanical Specifications Built-in 4 asynchronous high-speed programmer modules representing the industry's peak level. SuperPro / 7500. Supporting up to 16 chips for simultaneous programming is the best choice for manufacturers with high productivity, high versatility and high quality.
PAGE 3
Password management project files and production control can be password protected Batch Command auto-execute multiple command sequences with oneclick batch command Dynamic Data buffers Each chip can be programmed with different data files . it is suitable for programming applications such as product serial number and MAC address. JAM/STAPL Player and Direct C Direct support JTAG Player Direct support Complete run log files and statistics Production quality tracking MES and Industry 4.