User Manual
SuperPro 7500
4 Gang Stand-Alone Universal IC Programmer
Overview
Meet the new standard in the universal programming industry. The ultra-powerful system
engine allows to program either single or 4 chips simultaneously with equal ease. Convert
the universal programmer into a 4 gang programmer just by inserting a 4-socket adapter.
No need to buy an expensive gang programmer anymore and save thousands.
Application and target customers: Programming houses, electronic repair, car repair shops,
forensic and data recovery companies, medical devices, requirement for larger device
support.
Advantages
Ultra-Fast Programming Speed Our semiconductor manufacturer approved algorithms,
precision and clean signals guarantee high programming yield.
Customized 4 Gang Adapters SuperPro 7500 can be used to program up to 4 chips at a
time.
Built-In 144 Pin Driver SuperPro 7500 is equipped with a built-in universal 144 pin driver
to accommodate large pin count devices. One universal adapter accommodates all
devices with the same package type.
Stand-Alone Mode SuperPro 7500 is capable of operating in stand-alone mode. Under
stand-alone mode, it can be operated by an inexperienced operator with minimal
training.
LAN Mode On SuperPro 7500, remote controlling can be achieved using the LAN port.
Using the LAN port, programmers can be connected to a local network and can be
remotely controlled via any computer on the network.
Tester for Logic Devices and SRAMS SuperPro 7500 is also designed for IC testing of
various devices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.
Technical Support Xeltek is proud to offer same day support for technical inquiries.
SuperPro 7500 comes with
Software CD
AC Adapter
USB Cable
SD Card
Specifications
Devices Supported
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware
HUB, Microcontroller, MCU
Package Types
Supported
DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP,
MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA,
FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.
PC Interface
USB 2.0, LAN
PC Compatibility
Windows XP/Vista/7/8/10 (32/64 bit)
Stand-alone Memory
SD Card
Power Supply
AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Dimensions
Main unit: 184(L) x 160(W) x 78(H)
mm
Package: 310(L) x 250(W) x 145(H)
mm
Weight
Main unit: Weight 1.8 lbs (0.8 Kg)
Package: Weight 3.8 lbs (1.65Kg)
PROGRAMMER FEATURES
SuperPro 7500 supports 65,700+ IC
devices from 266 manufacturers and
continuing.
SuperPro 7500 offers 8-10 times faster
programming speed for eMMC devices as
compared to SuperPro 6100.
Four chips can be programmed
simultaneously (depends on device and
package type).
Supports eMMC and NAND devices up to
256 GB.
Improved universal 144 pin-driver
technology provides a cleaner signal,
wider voltage range and more accurate
clock frequency.
Three operating modes:
o PC mode via USB2.O port and PC
communication.
o Stand-Alone mode (no PC required).
o LAN mode.
Cluster 1-15 units for volume production.
Supports VCC from 1.2V to 5V.
Only IC manufacturer approved
programming algorithms are used for
high reliability. VCC verification at (+5% -
5%) enhances programming reliability.
Free user requested device updates
2 year warranty
www.xeltek.com
sales@xeltek.com
Xeltek and SuperPro are registered trademarks of Xeltek