Programming Guide

1296 Kifer Rd. Suite #605 Tel: [phone]
Sunnyvale, CA 94086 Email: [e-mail]
- 1 - Copyright © 2008 Xeltek Inc.
Quick PC mode Programming Guide
SuperPro® 500P / 600P / M Programmers
1. Connect programmer to PC via the provided USB cable.
2. Power on the programmer, and wait for a few seconds.
3. Double click on SuperPro® M or Superpro 500P/6 0 0P icon from the desktop to open
software.
4. Click “Device” to select preferred chip manufacturer and device name. (In this example,
MX28F1000P chip was selected) Click “OK”.
5. To program a new chip, click “Blank_Check”, but if operation fails, click “Erase” first then
“Blank_Check”.
<Screenshot of Opened window>
6. Select "Buffer" and input data into Buffer Edit window. Click "OK".