User Manual

SuperPro
®
6104GP User’s Guide 44
1. Enter the automatic start buffer address in the Start Addr field.
2. Enter the automatic end buffer address in the End Addr field.
3. Enter 1 in the Inc. Step field.
4. The AutoInc Format defines the start value and the overflow value. The overflow value
is the number at which the increment ceases and carries to the next address, which
becomes the new start value.
 Select Binary to set the start value as 0 and the overflow value as 256.
 Select ASCII Decimal to set the start value as 30 (hexadecimal representation of 0)
and the overflow value as 39+1 (the hexadecimal representation of 9).
 Select ASCII Hex to set the start value as 30 (hexadecimal representation of 0) and
the overflow value as 46+1 (the hexadecimal representation of a number greater
than F, where 9+1=A).