User's Guide

Xeleum Xi-Fi Wireless Control Application User Guide Page | 5
Add more fixtures by repeating the process of pointing and clicking the Xi-Fi Remote (Wand) at
them.
Each item, or fixture tile, in the discovery list will display the following information…
Tip: We recommend only discovering the fixtures in the immediate zone of fixtures you are occupying – follow the
next section on ‘Zone Creation’ to learn how to do this – When all fixtures in the zone you are occupying have been
discovered and synchronized, move to the next zone and discover those fixtures.
Click Tile to ID Fixture
Every time a fixture tile in the discovery list is clicked, the Xi-Fi app will send a message causing
that specific fixture to flash*, making it possible to visually identify the exact fixture you wish to
address. Do this to confirm each fixture before adding it to the group you wish to assign, this will
ensure group creation accuracy. You will have to visually locate these flashing fixtures at your
site so it is best to perform this procedure from a good vantage point.
*Some fixtures will only flash their bright blue indicator light in response
Photo Image of Fixture
Fixture Product Name
Assigned Number in order
of discovery for fixture type
Channel Number (0-15)
Zone Number (0-255)