User's Guide

Xeleum Xi-Fi Wireless Control Application User Guide Page | 4
The name you enter will be automatically stored by the App. It will be the name you need to select
when you come back to the App later and go through the “Load Site Plan” option.
Tip: Use a name that is simple, but descriptive. Names cannot be duplicated. Also, if you have multiple buildings,
parking garages, etc. it is recommended that you use at least 1 site plan per building. If you’re doing stairwells, 1 site
plan per stairwell is recommended.
Fixture Scanning and Discovery
Here is where you will begin to add Xeleum fixtures to the Discovery List…
You’ll notice the instruction “Use Wand to add fixtures…” in the Discovery List on the right side
of the screen.