User's Guide

Xeleum Xi-Fi Wireless Control Application User Guide Page | 18
All Channels Scan
Single Channel Scan
Range Channel Scan
Advanced Zone Settings and Features Panel
On the Zone Settings panel, at the top right you will see a cog symbol that is a button leading to
the advanced settings panel. This is an uncommon settings menu, only utilize if you have been
instructed to by Xeleum Xi-Fi experts.
Click the cog button and a new panel should come up in place of the regular Settings View panel.
These settings include: Battery Diagnostics, Frequency Channel, and Zone Number.
Battery Diagnostics
Clicking the red circle that reads “Test” will engage a 30 second diagnostic of any fixture I
in the zone that has Xi-Fi compatible emergency battery backup.
Frequency Channel
Adjusting the Frequency Channel will ‘shift’ all fixtures in this zone to a different
frequency band on which they will communicate to each other. There are 16 frequency
channels Xi-Fi fixtures can utilize however it is highly recommended to only ever use
Channel 1. Channel 1 is the only channel that can make use of the Xi-Fi Remote (Wand)
discover capability. Only shift frequency channel if you are certain there is interference