User's Guide

Xeleum Xi-Fi Wireless Control Application User Guide Page | 10
Synchronizing the Zone
After dropping any fixture tile in a box, the center circle of the box will change color and show
the word “Sync”. Clicking the Sync circle on the main workspace will only bring up the Zone
Settings View as described in the previous section. You will have to click the Sync circle again in
order for any settings to be transmitted to the fixtures of that zone.
You can click the “Sync” circle immediately to transmit default settings or adjust custom settings
first and then click to transmit
After making any changes to the settings the fixture counter will change into a “Send” button.
By clicking Sync the following will happen:
• Changed Settings in the queue will start broadcasting over the network
• Send button now displays the fixture counter
• Fixture counter decrements as fixture acknowledge receiving all group settings
• Settings sidebar is disabled temporarily