Testo Smart Probes testo Smart Probe user manual Chapter 1 Project overview Testo Smart probe project involve development on APP and eight types of probe which APP can get measurement data from probe and also realize extend function on refrigerant/VAC/heating system. Page 1 Product name Model No.
Testo Smart Probes Chapter 2 Product description 2.1 Smart Probe App Control of the Smart Line instrument via smartphone / tablet Check measured data wireless on smartphone / tablet Do trendings as graph or table on smartphone / tablet Send measured values in protocol as .pdf or excel file Wireless connection Bluetooth Low Energy Range 20 m (unobstructed field), 5m for handhold probe Compatibility Android 4.3 or higher / iOS 7.
Testo Smart Probes 2.1 Smart Probe testo 405i Measures air velocity, volume flow and temperature Easy set up for volume flow measurement via APP Easy determination of timed or multi-point average via APP Telescopic probe that can be extended up to 400 mm Determine BTUh in combination with testo 605i Check measured data wireless on mobile device Send measured values in protocol as .
Testo Smart Probes 2.2 Smart Probe testo 410i Measures air velocity, volume flow and temperature Easy set up for volume flow measurement via APP Easy determination of timed or multi-point average via APP Comparison of volume flows of different registers on one screen for balancing Check measured data wireless on mobile device Send measured values in protocol as .
Testo Smart Probes 2.3 Smart Probe testo 510i Can be used to determine differential pressure, air velocity and volume flow Easy set up for volume flow measurement via APP Easy determination of timed or multi-point average via APP Menu to perfom tightness / leak test on gas pipes Check measured data wireless on mobile device Do trendings as graph or table on mobile device Send measured values in protocol as .pdf or excel file Measuring range 0 … 150 hPa / 60 in wc ±0.05 hPa (0 ... 1.00 hPa) / ±0.
Testo Smart Probes 2.4 Smart Probe testo 549i No / minimal refrigerant loss due to no hoses required Fast and easy installation Work on systems with pressure ports that have larger distance in between Automatic calculations of vapor and saturation temperature on smartphone Calculate all necessary refrigeration parameters in App in combination with smart temperature probes Check measured data wireless on mobile device Do trendings as graph or table on mobile device Send measured values in protocol as .
Testo Smart Probes 2.5 Smart Probe testo 605i Automatic calculation of wet bulb and dew point in App Determine BTU/H in combination with testo 405i Check measured data wireless on mobile device Do trendings as graph or table on mobile device Send measured values in protocol as .pdf or excel file Measuring range -20 to 60 °C, -4 to 140°F, 0 to 100 %rH ±1.8 %rH + 3% of rdg. at +25 °C (5 to 80 %rH) ±0.
Testo Smart Probes 2.6 Smart Probe testo 115i Work on systems with measuring points for temperature that have big distance in between Calculate all necessary refrigeration parameters in App in combination with smart temperature probes Check measured data wireless on mobile device Do trendings as graph or table on mobile device Send measured values in protocol as .
Testo Smart Probes 2.7 Smart Probe testo 905i Check measured data wireless on mobile device Do trendings as graph or table on mobile device Send measured values in protocol as .pdf or excel file Measuring range Accuracy Resolution Dimensions Measuring cycle Battery life Battery type Operating temperature Storage temperature -50 to 150°C / -58 to 302 °F ±1 °C / ±.1.8 °F 0.1 °C / 0.
Testo Smart Probes 2.8 Smart Probe testo 805i Diffractive optic as laser marker (laser circle) Picture with temperature marking can be generated in App for documentation Check measured data wireless on mobile device Send measured values in protocol as .pdf or excel file Measuring range -30°C to 250 °C / -22 to 482 °F ±1.5 °C or ±1.5 % of m.v. (rest) ±2.0 °C (-20.0 to -0.1 °C ) ±2.5 °C (-30.0 to -20.
Testo Smart Probes Chapter 3 Safety 3.1 Safety with testo 510i and testo 605i 3.2 Safety with testo 549i Risk of injury caused by pressurized, hot, cold or toxic refrigerants/media! - Only to be used by qualified staff. - Wear protective goggles and safety gloves. - Before applying pressure to the measuring instrument: always fix the instrument tightly onto the pressure connection. - Comply with the permissible measuring range (0 to 60 bar).
Testo Smart Probes 3.
Testo Smart Probes Chapter 4 Operation principle 4.1 App operation principle App which install in smart phone shall be received and display measurement value from Smart probes when it’s opening via Bluetooth. Customer also can configure units or other parameters by App. 4.2 testo 405i operation principle testo 405i has a NTC sensor, which shall change resistant value related ambient temperature.
Testo Smart Probes 4.4 testo 510i operation principle testo 510i has a differential pressure sensor, which can recognize differential pressure signal from gas pipes. Sensor can transform Pressure signal to electronic signal automatically, and transform analog signal from sensor to digital signal for MCU by A/D. Then MCU control the Bluetooth module to send data to smart phone via Bluetooth and also received parameter changed and action protocol from smart phone. Key is use for start ,stop and hold value.
Testo Smart Probes Key is use for start ,stop and hold value. Led is use for indicate status of device. Red : warning, such as low battery level Yellow: finding App in smart phone via Bluetooth Green: communication success. 4.7 testo 115i operation principle testo 605i has a NTC sensor in clamp, which shall change resistant value related surface temperature. Circuit is response for detect NTC’s resistant and calculate surface temperature of pipe, which clamp catch, through NTC’s feature by MCU.
Testo Smart Probes 4.9 testo 805i operation principle testo 805i has a IR sensor, which can recognize surface temperature by IR reflect. Analog signal from sensor shall be transformed to digital signal by ADC for MCU. Laser shall be turn on automatically when measuring. Then MCU control the Bluetooth module to send data to smart phone via Bluetooth and also received parameter changed and action protocol from smart phone. Key is use for start ,stop and hold value. Led is use for indicate status of device.
Approval and Certification Product 产品名称 Mat.-No. 型号 Date 日期 Japan testo 805i See Japan information 0560 1805 Bluetooth® Information 蓝牙信息 06.27.2022 Comments Australia Canada E 1561 testo 805i: IC: 6127B-05601805 see IC Warnings Europa + EFTA (Länderliste einfügen) The EU Declaration of Conformity can be found on the testo homepage www.testo.com under the product specific downloads.
IC Warnings CAN ICES-003(B)/NMB-003(B): This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. RSS-Gen & RSS-247 statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
